Whatman PM2.5 Pure Teflon Filters
Whatman PM2.5 PTFE membrane filters are designed for PM2.5 air monitoring. These high-purity, thin filtration devices are sequentially numbered and housed in chemically resistant polypropylene support rings. 46.2mm / 2.0um pore size. 50 pieces/box
P/N: 903-006
Whatman High-Purity Quartz Microfiber 47mm Filters
Whatman High-Purity Quartz Microfiber 47mm filters are used in many air sampling filter applications, including sampling of acidic gases, stacks, flues, and aerosols. Filters are suitable for PM-10 sampling and heavy-metals analysis. 100 pieces/box
P/N: 903-007
Glisseal Grease
Increase the accuracy of your sampling data by reducing “particle bounce” with silicone-free lab grease. For use with PM2.5 and PM10 Impactors.
P/N: 903-004
47mm Filter Cassette
FRM Style Cassette. Stainless Steel Support screen and high-quality Delrin machined with excellent dimensional accuracy.
P/N: 702-001
Filter Cassette Separator
The Filter Cassette Separator allows for easy separation of filter cassettes while eliminating contact with filter and filter support screen.
P/N: 600-007
Multiple Impactor Adapter (MIA)
Designed to house AirMetrics’ PM10 impactor upstream from PM2.5 separation. PM10 and larger particles are separated from the sample at this stage.
P/N: 205-001
MiniVol TAS Louvered Inlet
Slide inlet onto the filter holder assembly to keep bugs and weather out of the sample train.
P/N: 207-001
PM2.5 Impactor
Designed to separate PM2.5 at a flow rate of 5L/minute when used in-line with AirMetrics’ PM10 Impactor and Multiple Impactor Adapter (MIA).
PM2.5 Impactor Efficiency
P/N: 202-100
PM10 Impactor
Designed to separate PM10 at a flow rate of 5L/minute.
PM10 Impactor Efficiency
P/N: 202-000
MiniVol TAS Dual Pulse Dampener
Reduces pulsation during pump operation and enables easy flow-meter readings.
P/N: 101-040
Flow-Meter
White backing on the flow tube enables better visibility of the float increasing reading accuracy.
P/N: 101-003
Programmable Timer
Set your sampling cycles manually or program up to six on/off cycles within a 24-hour period. Runs on a single AA battery.
P/N: 101-002
MiniVol TAS Pump
Double diaphragm pump with laminar flow valve technology. Designed specifically for the MiniVol TAS.
P/N: 108-000
MiniVol TAS Pump Rebuild Kit
Replace worn out pump valves and diaphragms to avoid leaks and data loss due to low flow issues.
Includes Qty. (2) pump diaphragms and Qty. (2) pump valves.
P/N: 108-021
MiniVol TAS 18V Pump Motor
Swiss ball bearing motor with precious metal commutation, designed for a service life exceeding 10,000 hours.
P/N: 108-012-24A
Lithium-Ion Battery Pack
High-capacity power source delivers 24 hours of continuous sampling when flow-rate is set to 5 L/minute.
Battery Pack Specifications:
Model | PM148-8800L |
Battery Capacity | 6600mAh |
Battery Voltage | 14.8V TYP. 12–16.8V |
Discharge Current | Max 6A |
Charge Voltage | 18.0V |
Charge Current | 2A |
Battery Size(mm) | 200*112*22 |
Battery Weight | 600G |
Battery Gauge | Five stage charge level indicator (low battery alarm) |
Battery Protection | Over-charge/over-discharge/excess current/short circuit |
Discharge Temp. | -20C~60C (Recommend -10C~50C) |
Charge Temp. | 0C~40C |
Recharge Time | 6 hours |
Storage | 10C~40C (Recommend -5C~35C) Full charged one time/45 days |
P/N: 700-100
MiniVol TAS Battery Charger
For use with MiniVol TAS Li-Ion battery packs. Can be plugged directly into MiniVol TAS for AC operation.
P/N: 700-101
MiniVol TAS Solar Panel
Supplemental power source extends remote location sampling capabilities.
P/N: 700-600
MiniVol TAS Tripod
Collapsible lightweight tripod allows for free standing operation. (Does not fit inside MiniVol TAS Transport Case)
P/N: MiniVol TAS Tripod